The
epsilon-2 experiment
An experiment requires a lot of patience and perseverance.
It is possible that the coil of the previous variant generates
insufficient radial electric potential to demonstrate the angular acceleration.
In the present version, in series or parallel with coil, is put an electrolysis
circuit,
which overlaps with potential over REP as shown in the drawing.
The electrolysis circuit consists of two circular strips of aluminum sheet,
the positive electrode and an aluminum ring attached to the coil, the
negative electrode.
Between the magnetic field of the bobbin and PER, the current through
electrolyte,
an electromagnetic force is produced and the device is accelerated angularly.
